CableWarehouse.Biz. Your source for cables, A/V and a variety of must-have products
Quick search
18in GO!MOD MOLDED ROUND 1-DEVICE FLOPPY CABLE - BLACK
(Reference #787750000)
Connect any 3.5in floppy drive to your controller with the GO!MOD Molded Round Floppy Drive Cable from CableWarehouse.Biz. The slim-line design reduces internal cable clutter for a clean, professional look. This slim profile will reduce overheating by allowing more airflow inside your case. The flexibility of the floppy cable makes them easier to install than flat ribbon cables. Not to mention the added style you get with the GO! MOD Molded Round Cables! The Molded Round Floppy Drive Cable features two 34-pin drive connectors. In addition to working with 3.5in floppy drives, it is designed to work with older tape back-up drives. Features: Connectors: 2 x 34-pin IDC. Connects internal floppy devices to internal controller. Designed for data transfer and floppy device control. Reduce overheating and save internal space. Easier to install than flat ribbon cables. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to systems with windowed side panels.
Price:
$4.01
24in GO!MOD MOLDED ROUND 2-DEVICE FLOPPY CABLE BLACK
(Reference #787850006)
Connect any 3.5in floppy drive to your controller with the GO!MOD Molded Round Two Device Floppy Drive Cable from CableWarehouse.Biz. The slim-line design reduces internal cable clutter for a clean, professional look. This slim profile will reduce overheating by allowing more airflow inside your case. The flexibility of the floppy cable makes them easier to install than flat ribbon cables. Not to mention the added style you get with the GO!MOD Molded Round Cables! The Molded Round Two Device Floppy Drive Cable features three 34-pin drive connectors and is designed for drive A and drive B locations. In addition to working with 3.5in floppy drives, it is designed to work with older tape back-up drives. Features: Connectors: 3 x 34-pin IDC. Connects internal floppy devices to internal controller. Designed for data transfer and floppy device control. Reduce overheating and save internal space. Easier to install than flat ribbon cables. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to systems with windowed side panels.
Price:
$5.59
24in GO!MOD MOLDED ROUND 1-DEVICE FLOPPY CABLE - BLACK
(Reference #787950009)
Connect any 3.5in floppy drive to your controller with the GO!MOD Molded Round Floppy Drive Cable from CableWarehouse.Biz. The slim-line design reduces internal cable clutter for a clean, professional look. This slim profile will reduce overheating by allowing more airflow inside your case. The flexibility of the floppy cable makes them easier to install than flat ribbon cables. Not to mention the added style you get with the GO! MOD Molded Round Cables! The Molded Round Floppy Drive Cable features two 34-pin drive connectors. In addition to working with 3.5in floppy drives, it is designed to work with older tape back-up drives. Features: Connectors: 2 x 34-pin IDC. Connects internal floppy devices to internal controller. Designed for data transfer and floppy device control. Reduce overheating and save internal space. Easier to install than flat ribbon cables. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to systems with windowed side panels.
Price:
$5.20
18in GO!MOD MOLDED ROUND 2-DEVICE ULTRA ATA133 EIDE CABLE - BLACK
(Reference #788050018)
GO!MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$5.39
18in GO!MOD MOLDED ROUND 2-DEVICE ULTRA ATA133 EIDE CABLE - UV REACTIVE BLUE
(Reference #788150020)
GO!MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter which in turn increases airflow within your case, and that helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Plus, the GO!MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$5.39
24in GO!MOD MOLDED ROUND 2-DEVICE ULTRA ATA133 EIDE CABLE- BLACK
(Reference #788250024)
GO! MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$6.05
24in GO!MOD MOLDED ROUND 2-DEVICE ULTRA ATA133 EIDE CABLE - UV REACTIVE BLUE
(Reference #788350029)
GO!MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$6.05
24in GO!MOD MOLDED ROUND 2-DEVICE ULTRA ATA133 EIDE CABLE- UV REACTIVE RED
(Reference #788450030)
GO! MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$6.05
24in GO!MOD MOLDED ROUND 1-DEVICE ULTRA ATA133 EIDE CABLE - BLACK
(Reference #788550033)
GO!MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to 80-wire/40-pin IDC Female. Devices Supported: 1. Cable Type: Type-B. Connector Layout: Blue connector: System; Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$6.05
36in GO!MOD MOLDED ROUND 2-DEVICE ULTRA ATA133 EIDE CABLE- UV BLUE
(Reference #788650039)
GO! MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$7.18
36in GO!MOD MOLDED ROUND 2-DEVICE ULTRA ATA133 EIDE CABLE BLACK
(Reference #788750040)
GO!MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO!MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females. Devices Supported: 2. Cable Type: Type-B. Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$7.18
36in GO!MOD MOLDED ROUND 1-DEVICE ULTRA ATA133 EIDE CABLE - BLACK
(Reference #788850045)
GO!MOD Molded Round Ultra ATA133 Cables from CableWarehouse.Biz deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case! The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used. Features: Connectors: 80-wire/40-pin IDC Female to 80-wire/40-pin IDC Female. Devices Supported: 1. Cable Type: Type-B. Connector Layout: Blue connector: System; Black connector: Master. Supports Ultra66/100/133 drives. Ideal for 1U servers and gaming/over-clocked systems. Perfect for adding style to cases with windowed panels.
Price:
$7.18
